How To Tone A 613 Wig?

Have you ever gotten a 613 wig but aren't satisfied with the color?

You've come to the right place.

It's not uncommon to see a wig with yellow brassiness and golden undertones. Or maybe it simply came in a blonde shade that you don't like. Sometimes, we've been so disappointed that we dump the wig and forget about it totally.

Well, I have just the solution for you. What if I told you it's possible to achieve that dreamy platinum shade you want by toning it?

While you can wear it straight out of the box, you could take a further step to transform your 613 unit. Don't worry, I'll show you just how you can do that in this post. Let's get right into it.

What is a 613 Wig?

A 613 wig is a platinum blonde unit. It is a wig in the lightest and palest shade of blonde. “613” is simply a code used for platinum or light blonde wigs. Typically, these wigs are lighter than a honey blonde but still warmer than an icy silver wig.

Related Read: What is A 613 Hair Color

👉Shop this 613 Blonde Body Wave Human Hair Wig

They are usually pre-bleached, making them a popular choice for customization. You can think of a 613 wig as a blank canvas to achieve any blonde shade or color you want. By toning it, you will not just remove unwanted yellow or golden undertones; you will also achieve a natural blonde color that suits your skin.

This results in a shade that's more flattering and gorgeous on Black ladies.

In short, toning a 613 wig:

- Eliminates brassiness and the intense light yellow shade that looks unrealistic and unnatural.

- Makes the lace and knots mimic the natural scalp.

- Helps the wig blend beautifully with the skin.

- Provides a shade you will enjoy for a long time.

Can You Tone a 613 Wig at Home?

Of course. While I wouldn't advise toning the hair yourself if you want to make big changes, it's okay to remove yellow brassiness and achieve a gorgeous natural-looking finish at home.

613 blonde wigs aren't difficult to tone, even for beginners. However, things can turn drastically if you decide to tone already damaged hair or correct a color.

Here's what I'll recommend you do before toning all of the wig's strands:

1. Perform a strand test

Take this part seriously. Get a piece of hair at the back of the wig or a small hidden section to see how quickly the wig absorbs the toner. This helps you monitor properly and avoid getting a different tone from what you want.

2. Wash the Wig

When toning, you don’t want to have chemicals, coatings, or residue in the wig. So, wash the unit properly with a gentle shampoo.

3. Detangle Properly

Use a wide-tooth comb to brush the hair gently. Start from the ends of the wig and move up gradually. This helps you avoid forming more knots and hair breakage while combing.

4. Get a Timer Ready

613 wigs don’t take long to get toned properly. So, avoid leaving it in the toner mixture for too long. You can set a timer and remove it once it's up.

A Guide on How to Tone a 613 Wig

Here’s how to tone your 613 wig in a few simple steps:

Step 1: Gather All Your Tools

Before getting started, gather all the supplies you'll need. This makes it easier to get it done in one go without damaging the wig.

Note: You can use a purple shampoo or a toner and a developer. If you'll be using a toner, check out Wella T35 liquid toner. It's great at neutralizing yellow, brassy tones and unwanted tones in a wig.

Here's a full list of what you need:

● Your 613 wig

● A purple shampoo or hair toner

● 10-volume developer (if you'll be using a toner)

● A mixing bowl

● An application brush

● Wide-tooth comb

● Sulfate-free shampoo

● A deep conditioner

● Gloves

● A big bowl (you can also use your sink)

● A microfiber towel

Step 2: Prep the Wig

Once you have all your tools, get your 613 wig ready. It doesn't matter if it's a synthetic or human hair wig. What’s necessary is to prepare the hair for toning.

First, remove all the tangles with a wide-tooth comb, then wash the wig properly.

Now, use a gentle shampoo that contains sulfates to clean the hair. This should get rid of any coating or styling products used at the factory. It also helps remove buildup and residues if it's an old hair unit.

Rinse the wig properly afterwards and dry with a microfiber towel until it's damp. While water should not drip from the hair, you also don't want it to dry.

Step 3: Prepare Your Toner

Pour warm water into a sink or a bowl and add the purple shampoo. Be sure the amount is appropriate for the water.

Now, stir the water till the shampoo disperses completely and mixes with the water. You should get a lavender or light purple color. Be careful not to add too much shampoo, as it can cause the wig to turn purple or gray.

📌If you're using a toner, you'll need to mix your toner and developer in a bowl.

Pour one part toner, then add two parts 10 volume developer, and stir until you reach a smooth consistency. (If you get another toner, remember to follow the instructions to add toner and developer to mix.)

Step 4: Soak the Wig

This is the part where you have to be very careful, as doing it wrong can cause damage.

Gently dip the wig into the purple shampoo mixture. Keep dunking the wig, then time it for about five to 10 minutes. Check on the hair regularly so it is saturated, and avoid toning it to another shade.

📌But if it's with a toner and developer, place the wig on a mannequin and section it into a few parts. This makes it easier to cover all the strands.

Now, use a clip to hold each section, loosen each, and apply the toner with the application brush.

You should start from the root and cover all the strands properly. Once you've applied it, run a wide-tooth comb through the hair to cover every strand, then leave it for a few minutes.

Do not start doing other things! Sit with it and watch it closely because it changes faster than you think. If you notice the yellow brassy tones have changed to a natural blonde, it's time to rinse it off.

Step 5: Rinse and Deep Condition

After toning, rinse your wig with cool water immediately. It's best if you do this under running water. While you shouldn't rub or handle it roughly, make sure to get the shampoo out.

Once the water runs clear, deep condition the wig. Just get a good amount of deep conditioning mask and apply it to the wig. Focus on the mid-lengths and ends. This will bring back moisture and make the texture fantastic. You can leave the conditioner on for about five to 10 minutes before rinsing it off with water.

Step 6: Air Dry the Wig

Place the wig on a microfiber towel and use the other side to pat dry. This dries the wig a bit without damaging the strands.

Now place the wig on a stand and leave it to air dry. Do not dry it under the sun or in a hot environment. I also wouldn't recommend using a heat styling tool while it's still wet.

Step 7: Style Your Toned 613 Wig

You can brush and style your wig once it is completely air-dried. It should look super gorgeous and natural with no yellow brassy tones in sight.

Mistakes To Avoid

Here are simple mistakes to avoid:

1. Passing on the strand test

Do not be in a hurry to tone your wig and skip the strand test. The test helps you decide if it's okay to go on with the product you have or get another one. Also, it saves you from experiencing heartbreak that can be caused by hair damage if it doesn't go well.

2. Leaving the toner in your wig for a long period

613 wigs can shift color faster than you think. An extra minute can change the color of the blonde hair.

3. Bleaching the wig again yourself

Do not bleach your 613 wig. These wigs are already pre-bleached, making it easy to work with. However, if you aren't satisfied with the shade, you can take it to a professional colorist. They can advise you on what to do and get it done beautifully.

Using the wrong amount of products: Be sure to follow the instructions on the toner packaging if you're using this method. Using more or less will not give you the desired result and might even lead to other issues.

How to Tone 613 Wig Knots?

How to Maintain A Toned 613 Wig?

1. Use low heat under 200 degrees. High heat could leave strands brittle and even change color.

2. Use heat protectant always. Your wig will thank you over the years.

3. When not in use, store in your satin bag or wig bag. This protect your hd lace and strands.

4. Use color friendly shampoo and conditioner when washing your wig.

Final Thoughts

A 613 wig gives you a blank canvas to work with. You can choose to rock it as it is or tone it to achieve a natural-looking style that suits your skin beautifully. While the process of toning the hair is very easy, avoid making mistakes that could lead to a disaster, and care for your wig properly after toning. You'll definitely enjoy your unit.